Home | Clearance | Paddle Boats | Pontoon Boats | Escape Boats | Swim Rafts | Pontoon Options | Motors
Ahlstrand Marine | Orders and Terms | Contact Us | Decorative Manila Rope

click on image to enlarge

All American Pontoon Trailer


A pontoon trailer that is perfect for 13-16' pontoon boats. It comes complete with the winch stand and winch, taillights and connector, and comes in either a painted or galvanized finish. Will work with pontoon boats up to 8' wide.

Sale Price: From $1,299*



*Shown with optional 3rd wheel jack
*Pontoon boat shown not included


click on image to enlarge

GillGetter/Qwest Mooring Covers


GillGetter/Qwest factory made custom mooring covers. The built-in snaps allow the cover to be put on and taken off with ease. Also included are cover poles to allow the cover to shed water while it is raining.

Call for Price




click on image to enlarge

4-Step Removeable Pontoon Ladder


A stainless steel 4-step ladder for pontoon boats. It is removeable and easy to stow with its bottom two steps that telescope and the 2 stainless handles that fold in. Comes complete with mounting brackets.

Sale Price: $199.88




click on image to enlarge


Magnesium Anode
(For Fresh Water Aluminum Pontoons)


If you keep your aluminum pontoon boat in the water for weeks or all season you should be using an anode to keep the aluminum from pitting and corroding. In salt water you need a zinc anode, but in fresh water you need a magnesium anode. This unit can easily be placed on the pontoon motor mount or transducer mounting bracket (see photos). Change anodes when they are 70% consumed. Each 3" (2 disk) magnesium anode is manufactured to US Military alloy specifications.

Sale Price: $22.88*

*Limited Availability

This is what the anode will look like when it is working properly:


Table Assembly w/ Removeable Pedestal


A new table assembly complete with mounting base, pedestal, and table top. With its quick stow design, the table top and pedestal can be removed in a matter of moments: just twist and lift. The stainless steel mounting base stays screwed to the deck and is almost completely flush with the floor.

Specifications
  • Table Top Diameter: 21"
  • Table Height: 27 1/2"
  • # of Cupholders: 4

Sale Price: $169.88*

*Limited Availability



Panther Power Tilt Bracket
- for Main Power Electric Motors


A new Panther 350 power trim/tilt bracket for electric main power motors like Torqeedo, Ray, and Parsun. This Panther power trim and tilt complete with harness, control, and instructions. This unit is easy to install with the top edge having a lip to aline the unit with the boats transom. Weight capacity is 150 lbs...enough for 2 motors!

Sale Price: $488.88*

*Limited Availability






Pontoon Rod Holder - Square Rail Mount


A new Taco pontoon boat rod holder that clamps around a pontoon's square railing (both 1" and 1 1/4" sq. tube). This rod holder is made of anodized aluminum and black plastic with stainless fasteners. The rod holder can be adjusted to many positions.

Retail Price: $49.99

Sale Price: $19.99*

*Limited Availability


Minn Kota MK-25 2-Bank Battery Charger


New in the box, Minn Kota 6 amp on-board, 2-bank charger. Will charge 2 batteries at 3 amps each or run both cables to one battery and charge at 6 amps etc.

Features
  • Waterproof
  • Fully automatic
  • (2) 6' charging cables
  • 6' Power cord
  • 6 Amp power output
  • (3) LED lights - Charging, Full Charge, & Check Connection
  • On-Board mounting bracket
  • Short circuit protection
  • Reverse polarity protection
  • 3-Year warranty

Retail Price: $93.62

Sale Price: $69.88*

*Limited Availability



Minn Kota MK-35 3-Bank Battery Charger


New in the box, Minn Kota 6 amp on-board, 3-bank charger. Will charge 3 batteries at 2 amps each or run all three cables to one battery and charge at 6 amps etc.

Features
  • Waterproof
  • Fully automatic
  • (3) 6' charging cables
  • 6' Power cord
  • 6 Amp power output
  • (3) LED lights - Charging, Full Charge, & Check Connection
  • On-Board mounting bracket
  • Short circuit protection
  • Reverse polarity protection
  • 3-Year warranty

Retail Price: $105.62

Sale Price: $85.99*

*Limited Availability



Aluminum Bench


This a unique, all aluminum bench that is ideal for docks, piers, or even commercial tour guide boats. Looking for a durable, easy way to replace the seats in your pontoon boat? Then look no further because these benches are designed for outdoor use and will hold up to all kinds of weather conditions.

1st Quality -
SALE: $188.00*

Damaged -
SALE: $75.00*

*Limited Availability

Questions, comments, or suggestions? Email us at ahlstrandmarine@yahoo.com
Copyrights © Ahlstrand Marine, 1999-2011.